Network Setup. Planet WDRT-1200AC

User Manual of WDRT-1200AC

5.3 Network Setup

5.3.1 LAN Setup

Click “Network Setup”  “LAN Setup” and the following page will be displayed.

Figure 5-3-1 LAN Setup

The page includes the following fields:

Object

 IP Address:

Description

Router’s LAN IP.

The default is 192.168.1.1. You can change it according to your needs.

 Subnet Mask:

 Use Router as DHCP

Server:

Router’s LAN subnet mask.

If it is selected, the router serves as the DHCP server and automatically assigns IP addresses for all computers in the LAN.

 IP Pool Starting Address:

The start IP address of all the available successive IPs.

 IP Pool Ending Address:

The end IP address of all the available successive IPs.

 Lease Time:

 Local Domain Name:

Select the time for using one assigned IP from the dropdown list.

After the lease time, the AP automatically assigns new IP addresses to all connected computers.

Set the domain name of the server.

 Address Reservation:

Select Add to enable DHCP Reserved Address service.

-33-