WPS Setup. Planet WDRT-1200AC

User Manual of WDRT-1200AC

5.4.2 WPS Setup

WPS (Wi-Fi Protected Setup) is designed to ease setup of security Wi-Fi networks and subsequently network management. The WPS enables the PC with WPS function to connect to the wireless network of the AP without setting any parameters, such as SSID, security mode, or password.

STEP 1

WPS (Wi-Fi Protected Setup)

Quick & Easy Wireless Connection

STEP 2 STEP 3

Connected

WPS

Click

Press

Simply enter a PIN code or press the software PBC button or hardware WPS button (if any) and a secure wireless connection is established.



PINΚTo use this option, you must know the PIN code from the wireless client and enter it in corresponding field on your device while using the same PIN code on client side for such connection.



PBC: If you press the hardware WPS button on the device, it means that PBC encryption method is successfully enabled. And an authentication will be performed between your router and the

WPS/PBC-enabled wireless client device during this time; if it succeeds, the wireless client device connects to your device. Repeat steps mentioned above if you want to connect more wireless client devices to the device.

Choose Wireless Setup > WPS Setup and the following page appears.

Figure 5-4-3 WPS Setup

-45-