Firmware Update. Planet WDRT-1200AC

User Manual of WDRT-1200AC

Figure 5-8-2 Backup Setup

To restore the router to the factory defaults, click Restore Defaults. This is identical with pressing down the

Reset button on the back panel and holding for 3 seconds. To export the current settings of router to the local PC for future use, click Save, select an address and save the settings.

To load a file to the router, click Browse to choose a configuration file on your PC and click Restore.

When you load new configuration, the original configuration will be lost. Please back up the current configuration before loading a new one. In this way, if the new configuration file has an error, you can load the backup file.

DO NOT

shut down your router when loading a configuration file. Otherwise, the router may be damaged.

5.8.3 Firmware Update

You install new versions of the router’s software using this page. From time to time, we may release new versions of the Router's firmware. Firmware updates contain improvements and fixes to problems that may have existed. Click the link below to see if there is a new firmware update available for this Router.

Click Utilities  Firmware Update and the following page will be displayed.

Figure 5-8-3 Firmware Update

-72-