KMPi TFF System Instructions for Use

SPECIFICATIONS

3. Specifications

Output

Speed:

All models

Torque output, max.

All models

0.1 to 650 rpm

520 oz-in (37.4 kg • cm)

1560 oz-in Starting

Speed regulation:

All models

Display:

All models

Remote outputs:

All models

All models

All models

All models

Input

Supply voltage limits:

All models

Current, max.:

All models

Remote Inputs:

All models

All models

All models

Line ±0.1% F.S.

Load ±0.1% F.S.

Drift ±0.1% F.S.

128 x 64 LCD w/ LED Backlight

Voltage speed output

(0-10V DC @ 1 kΩ min)

Current speed output

(0-10 mA @ 0-600Ω)

Tach output

(100 to 6500 Hz, 50% duty cycle, 10 Hz/rpm)

Motor running output

(N.O. & N.C. contact closure, 1A @ 28V DC)

90 to 260 Vrms @ 50/60 Hz

(Universal Input)

4.5A @ 115 Vrms, or 2.6A @ 230 Vrms

START/STOP, CW/CCW, PRIME

(Contact closure)

Voltage input (0-10V DC @ 10 kΩ),

±50V common mode range

Current input

(0-20 mA or 4-20 mA @ 250 Ω),

±50V common mode range

Construction

Dimensions (L x W x H):

All models

Weight:

All models

Enclosure Rating:

All models

17.5 in x 11 in x 13 in

(445 mm x 280 mm x 330 mm)

40 lbs (18 kg)

NEMA 4X per IEC 60529 - indoor use

4

KMPi TFF System • PRODUCT INFORMATION AND OPERATING INSTRUCTIONS

KMPi

SPECIFICATIONS

Environment

Temperature, Operating:

All models

Temperature, Storage:

All models

Humidity (non-condensing):

All models

0° to 40°C (32° to 104°F)

-25° to 65°C (-13° to 149°F)

10% to 100%

Altitude:

All models

Noise Level:

Pollution Degree:

All models

Less than 2000 m

<70dBa @ 1 meter

Pollution Degree 3

(Indoor use — Sheltered locations)

Chemical Resistance:

Models with stainless steel Exposed material is 316 stainless steel enclosure and hard coat anodized aluminum

Models with powder coated Exposed material is polyester coated steel enclosure steel and hard coat anodized aluminum

Compliance:

Conforms to ANSI/UL Std 61010-1

Certified to CAN/CSA Std C22.2 No. 61010-1

This product has been tested to the requirements of CAN/CSA-C22.2 No. 61010-1 second edition, including Amendment 1, or a later version of the same standard incorporating the same level of testing requirements.

(For CE Mark):

EN61010-1: (EU Low Voltage Directive) and

EN61326: (EU EMC Directive)

KMPi

5

KMPi TFF System • PRODUCT INFORMATION AND OPERATING INSTRUCTIONS