advertisement
DATA COLLECTION TOOLS
KMPi
a.
End Control: Used to end data collection. Certain functions in Excel need to be disabled for the data in the TFF Trial Template to be accessible. Clicking this will stop the spreadsheet from receiving live data, stop collection, and disable other controls. The data can then be saved and accessed for analysis like a normal Excel workbook. If the End Collection button is clicked once, the saved data can still be used for further data collection. If the End Collection button is clicked twice, the saved data cannot be used for further data collection.
b.
Configure Collection: Allows the user to open the Setup menu to configure basic KFComm settings.
c.
Stop Collection: After starting collection, the user may use the Stop Collection function to suspend data collection.
d.
One More Data Point: Allows the user to take a data point that was not part of the data collection intervals.
e.
Start Collection: Starts collecting data.
f.
Hardware Settings: Access and change the KMPi’s basic hardware settings.
g.
Workbook License: Calls up a dialog with licensing information.
h.
About KFComm: Calls up a dialog with basic KFComm information.
11.3.3. Pump Control
38
KMPi TFF System • PRODUCT INFORMATION AND OPERATING INSTRUCTIONS
advertisement
Key Features
- Integrated digital pressure monitor
- Easy-Load Pump Head
- Multi-language interface
- Real-time data collection software
- Automated shut-off controls
- Flow rates from 0.01-13.0 LPM
Related manuals
Frequently Answers and Questions
What is the maximum flow rate of the KMPi TFF System?
What types of pump heads are compatible with the KMPi TFF System?
What is the purpose of the KFComm software?
What is the range of processes suitable for the KMPi TFF System?
What is the maximum number of pump heads that can be attached to the KMPi TFF System?
advertisement