KMPi TFF System Instructions for Use

AUTOMATIC BACKPRESSURE VALVE

KMPi

10.3.3. Updating Automatic Backpressure Valve

1.

Connect the KrosFlo

®

Automatic Backpressure Valve to the computer via the RS232 port

2.

Turn on the valve and wait 60 seconds

3.

Ensure the appropriate update for the specific valve has been obtained

4.

Press and hold the Open button on the valve for 6 seconds, blanking the display

5.

Start the .exe file by double-clicking on it

6.

Click on the Start button to begin the process

7.

Either click the Find Comm button, or select the Comm port used by the valve

8.

Click on the OK button and the valve display will go dark — the valve will begin to update

9.

To verify a successful update, toggle the TMP/Permeate to restart the valve. The valve should now display the most current version

11. KFComm Software

11.1. KFComm License

Copyright © 2015 Spectrum Laboratories, Inc., Rancho Dominguez, USA. All rights reserved.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

•

•

Redistribution of source code must retain the above copyright notice, this list of conditions and the following disclaimer.

Redistribution in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.

34

KMPi TFF System • PRODUCT INFORMATION AND OPERATING INSTRUCTIONS