advertisement
1.2.1 Power
Overview
Power inlet
The power inlet
( )
allows you to connect the power supply.
Only use the power supply delivered with your TG234.
Power switch
The power switch
( )
allows you to power on/off your TG234.
TG234
1 Getting started
DMS3-CTC-25-221 v1.0
5
1 Getting started
1.2.2 Local network connection
Introduction
The TG234 provides your local network connection through:
5 GHz wireless access
Ethernet port
Wireless access point
The IEEE 802.11ac 5 GHz wireless access point adds 5 GHz wireless access to your home network, or allows to set up wireless connections between different devices.
“4 The TG234 wireless access point” on page 36
.
Ethernet port
TG234
GbE1 GbE2
The Ethernet ports (
GbE1
and
GbE2
) allow you to connect an Ethernet device to the wireless video bridge.
This Ethernet port requires the use of a full-wired CAT-5(E) (or better) Ethernet cable (like the one that delivered with your TG234) to guarantee network connectivity.
If you are not sure of your Ethernet cables, you can use the Ethernet cable that is delivered with your TG234.
DMS3-CTC-25-221 v1.0
6
advertisement
Key Features
- Multiple modes of operation: access point, repeater, station
- Strong security measures to protect your network
- Easy setup and configuration
- Compact and stylish design
- Supports the latest Wi-Fi standards
- Gigabit Ethernet ports for fast wired connections
- Parental control features to manage internet access
- Guest network support for secure sharing
- Advanced QoS (Quality of Service) for prioritizing traffic
- Remote management capabilities for easy administration
Related manuals
Frequently Answers and Questions
What are the different modes of operation for the TG234
How do I set up the TG234 as an access point
How do I set up the TG234 as a repeater
What security features does the TG234 offer
How do I configure the TG234
advertisement