advertisement
▼
Scroll to page 2
of
54
3 Configuration tools
Step 7: Configure the TG234
1 Configure your computer with a static IP address between 192.168.1.1 and 192.168.1.99 (for example: 192.168.1.79). Use
255.255.255.0 as subnet mask. For more information on how to configure a static IP address, consult your operating system’s help.
2 Configure the TG234 via the TG234 GUI. For more information, see
“3.1 Configure the TG234 via its GUI” on page 19
3 At the end of your session, remove the static IP address from your computer and make sure it gets an IP address automatically.
DMS3-CTC-25-221 v1.0
35
advertisement
Key Features
- Multiple modes of operation: access point, repeater, station
- Strong security measures to protect your network
- Easy setup and configuration
- Compact and stylish design
- Supports the latest Wi-Fi standards
- Gigabit Ethernet ports for fast wired connections
- Parental control features to manage internet access
- Guest network support for secure sharing
- Advanced QoS (Quality of Service) for prioritizing traffic
- Remote management capabilities for easy administration
Related manuals
Frequently Answers and Questions
What are the different modes of operation for the TG234
The TG234 can operate in three different modes: access point, repeater, and station.
How do I set up the TG234 as an access point
To set up the TG234 as an access point, connect it to your modem using an Ethernet cable and power it on.
How do I set up the TG234 as a repeater
To set up the TG234 as a repeater, connect it to your existing Wi-Fi network and follow the instructions in the user guide.
What security features does the TG234 offer
The TG234 offers a range of security features, including WPA2 encryption, Stateful Packet Inspection (SPI) firewall, and MAC address filtering.
How do I configure the TG234
You can configure the TG234 using its built-in web interface or the Technicolor Connect app.
advertisement