advertisement
▼
Scroll to page 2
of
54
5 Support
5.1 Setup troubleshooting
Your TG234 has not been found
If you cannot find your TG234 in your local network, make sure that:
The TG234 is turned on and fully initialized.
Your network devices (for example, a gateway, a set-top box,...) have a valid IP address, that is any address but 0.0.0.0, neither 192.168.1.100 nor 192.168.1.200. For more information, consult the help of your network device.
No dedicated firewall device or router is placed between your devices and the TG234.
No personal network security software (for example firewall software) blocks your network devices.
Your network devices are correctly connected to the TG234.
DMS3-CTC-25-221 v1.0
45
advertisement
Key Features
- Multiple modes of operation: access point, repeater, station
- Strong security measures to protect your network
- Easy setup and configuration
- Compact and stylish design
- Supports the latest Wi-Fi standards
- Gigabit Ethernet ports for fast wired connections
- Parental control features to manage internet access
- Guest network support for secure sharing
- Advanced QoS (Quality of Service) for prioritizing traffic
- Remote management capabilities for easy administration
Related manuals
Frequently Answers and Questions
What are the different modes of operation for the TG234
The TG234 can operate in three different modes: access point, repeater, and station.
How do I set up the TG234 as an access point
To set up the TG234 as an access point, connect it to your modem using an Ethernet cable and power it on.
How do I set up the TG234 as a repeater
To set up the TG234 as a repeater, connect it to your existing Wi-Fi network and follow the instructions in the user guide.
What security features does the TG234 offer
The TG234 offers a range of security features, including WPA2 encryption, Stateful Packet Inspection (SPI) firewall, and MAC address filtering.
How do I configure the TG234
You can configure the TG234 using its built-in web interface or the Technicolor Connect app.
advertisement