advertisement
▼
Scroll to page 2
of
54
5 Support
5.2 General TG234 troubleshooting
None of the LEDs light up (TG234 does not work)
Make sure that:
The TG234 is plugged into a power socket outlet.
You are using the correct power supply for your TG234 device.
The power requirements for your TG234 are clearly indicated on the identification label of the TG234. Only use the power adaptor supplied with your TG234.
The TG234 is turned on via the power switch on the back panel.
TG234 unreachable
If you can not access your TG234 via your web browser, you might consider a hardware reset as described in
“5.5 Reset to factory defaults” on page 50
.
DMS3-CTC-25-221 v1.0
46
advertisement
Key Features
- Multiple modes of operation: access point, repeater, station
- Strong security measures to protect your network
- Easy setup and configuration
- Compact and stylish design
- Supports the latest Wi-Fi standards
- Gigabit Ethernet ports for fast wired connections
- Parental control features to manage internet access
- Guest network support for secure sharing
- Advanced QoS (Quality of Service) for prioritizing traffic
- Remote management capabilities for easy administration
Related manuals
Frequently Answers and Questions
What are the different modes of operation for the TG234
The TG234 can operate in three different modes: access point, repeater, and station.
How do I set up the TG234 as an access point
To set up the TG234 as an access point, connect it to your modem using an Ethernet cable and power it on.
How do I set up the TG234 as a repeater
To set up the TG234 as a repeater, connect it to your existing Wi-Fi network and follow the instructions in the user guide.
What security features does the TG234 offer
The TG234 offers a range of security features, including WPA2 encryption, Stateful Packet Inspection (SPI) firewall, and MAC address filtering.
How do I configure the TG234
You can configure the TG234 using its built-in web interface or the Technicolor Connect app.
advertisement