Synergy Pro Client Operational Manual

4.4 Select Camera

To select a camera you wish to view, click the Select Camera button. The Select Camera screen is displayed.

All cameras for the currently selected group are displayed in the list. The camera currently viewed is highlighted. If you wish to select another camera click the button for it.

To select a different group, click Select Group. The Select Group of Cameras dialog is displayed allowing you to pick a different group.

Synergy Pro Client Operational Manual, Issue 5 ©

Synectic Systems Group Ltd 2013.

All Rights Reserved. Specifications subject to change. E & OE

Page 75

Camera groups are set up via Menus->Setup->System Setup->Users->Setup Device

Groups.

To close the Select Camera screen, click the Select Camera button again.

Synergy Pro Client Operational Manual, Issue 5 ©

Synectic Systems Group Ltd 2013.

All Rights Reserved. Specifications subject to change. E & OE

Page 76