Synergy Pro Client Operational Manual

5.7 Macros and Tours

The Macros and Tours menu options allow you to run macros, tours and patrols. Macros and tours allow a series of commands to be run with one simple action or click where normally they would require manual manipulation. I.e. A fire door is opened and the appropriate cameras turn to look at the event, and alarm is sounded and notification is sent to the system users.

Macros and tours will be programmed on your system during System Setup

Macros and tours are setup via Menus->Setup->System Setup->Macros and Tours.

The Macros and Tours menu options are pictured below:

Synergy Pro Client Operational Manual, Issue 5 ©

Synectic Systems Group Ltd 2013.

All Rights Reserved. Specifications subject to change. E & OE

Page 113