Synergy Pro Client Operational Manual

Hotswaps-Disabled? column is checked. When the PSN is actively hot swapping the checkbox in the Hot-Swapped? column is checked.

If there is a fault on the PSN the box in the Faulty? column is checked. You can clear the fault via the

Clear Fault button.

The History button brings up the View Stream History for PSN psn_name dialog.

9.6.2 DVR Channel Status

This is the status of all the channels of all the DVRs on the system:

The colour legend at the top of the screen is used to visually represent the state of each channel.

If a channel is coloured in red it is hot swapped; if it is yellow then there is a fault, but the channel has not been hot-swapped as all available channel for hot swap have already been taken.

In the event of camera failure you can turn off the alarm to avoid repeated alarms.

The buttons at the bottom of the screen can be used to turn alarms on and off, to start and stoop hotswaps etc.

Synergy Pro Client Operational Manual, Issue 5 ©

Synectic Systems Group Ltd 2013.

All Rights Reserved. Specifications subject to change. E & OE

Page 264