3.6

Printing vs Copying/

Scanning

The touch panel display will be as follows during printing or transmission.

When

Exit

is selected on the screen displayed, the next copying/scanning operation can be programmed ahead without disrupting the current printing operations.

3

The following table explains about the relationship between the printing function and the copying/ scanning function.

Control Panel Operations

Defining the copy/scan settings

Select

Press

Exit

during printing

Interrupt

during printing

Printer Actions

Cannot print but can receive printing instructions from computers.

After a certain time has passed after the settings, the document sent by the computer will be printed.

During copying/scanning, printing cannot be done. After these jobs are completed, documents sent by the computer will be printed in the order received.

Copying/scanning operations can be programmed ahead without disrupting the current printing operation.

Printing will be stopped temporarily and the copy/scan functions can be used. However, printing instructions can be received from the computers. When

Interrupt

is pressed again to exit the interrupt mode, printing will restart. Even during the interrupt mode, the print processing will start if no operations are carried out after a certain time*. Documents sent by the computer will be printed according to the order received.

* : This time setting is done from the Tools Mode screen. See "Chapter 13 Configuring by the Tools

Mode Screen" for details on the setting method.

38

This page is intentionally left blank.

This page is intentionally left blank.

This page is intentionally left blank.

This page is intentionally left blank.

Installing/

Configuring the Printer

Drivers

4.1

About the Printer Drivers ..................................................................... 44

4.2

Installing/Uninstalling the Printer Drivers ............................................ 45

4.3

Configuring the Printer Drivers ............................................................ 51