Installing/Uninstalling the Printer Drivers. Panasonic DA-PC700, All in One Printer DA-PC700

4.2

Installing/Uninstalling the

Printer Drivers

This section describes the procedure for installing and uninstalling the printer drivers.

Two methods of installation are described here, one for a local printer and the other for a network printer. If you have installed an earlier version of the printer driver, uninstall it first by following the procedure in 4.2.3 before installing the new version.

You can also use the Add Printer Wizard to install the printer driver. Refer to ReadMe in CD-ROM (PCL

Printer Driver, Utilities & Documentation) for more details.

4.2.1

For a Local Printer

Local printer refers to a printer that is directly connected to your computer.

Procedure

Start Windows 95, Windows 98, Windows Me, Windows NT 4.0 or Windows 2000.

In this example, we will install the PCL 6 driver on the Windows 98 OS.

Click

Start

and select

Run

.

The "Run" dialog box appears.

Insert in the "PCL Printer Driver, Utilities & Documentation" CD-ROM and enter "E:\Driver_PCL6\Win9x_Me\Setup\Setup.exe" on the Run dialog box.

Then click

OK

.

In this example, we assume that drive E is the CD-ROM drive. Enter the appropriate letter for your CD-ROM drive.

The "End User Licence Agreement" dialog box appears.

Read through the licence agreement carefully. If you have no objections to it, click on the checkbox for "I accept the terms of the above Licence Agreement" and then click

Next

.

4

45

4

4.2 Installing/Uninstalling the Printer Drivers

The "Printer Installation" dialog box appears.

Check the printer model and then click

Next

.

The "Available Platforms" dialog box appears.

Choose

Yes

or

No

in "Do you want to share this printer on the network?".

Then click

Next

.

The "Printer Installation" dialog box appears.

Determine the Port and Printer Name.

Then click

Next

.

46

4.2 Installing/Uninstalling the Printer Drivers

The "Ready to Start Copying" dialog box appears.

Click

Finish

to continue.

After the installation is completed, the following "Installation Successful" dialog box appears.

For Windows 95/98/Me For Windows NT 4.0/Windows 2000

To restart the system, click

Restart Windows Now

.

To exit the installation, click

Exit to Windows

.

To configure the printer driver, click

Printer Setup

(for the Windows 95/98/

Me driver) or

Printer Properties

and

Document Defaults

(for the Windows

NT 4.0/Windows 2000 driver).

"4.3 Configuring the Printer Drivers" for details on configuring the printer driver.

• You must restart Windows in order for the driver to work properly.

• You may run the "Setup.exe" program to install the Windows 95/98/Me printer driver as an alternate driver on the Windows NT/Windows 2000 server (workstation) after you have installed the printer driver for Windows

NT 4.0/Windows 2000. In this case, as there is no need to restart Windows, click Exit to Windows. When downloading the alternate Windows 95/98/Me driver installed in Windows NT/Windows 2000, on the Windows 95/98/Me client computer, use the "Add Printer Wizard" dialog box.

4

47