advertisement
Operating Basics
■ If you add data to a DVD-R/-R DL and DVD+R/+R DL disc that you have already recorded to, you might not be able to read the added data under some circumstances. It cannot be read in 16-bit operating systems, such as Win-dows 98 SE and Windows ME. In Windows NT 4, you will need Service Pack 6 or later to read added data. In Windows
2000, you will need Service Pack 2 or later to read it. Some DVD-ROM and CD-RW/DVD-ROM drives cannot read added data regardless of the operating system.
■ TOSHIBA Disc Creator does not support recording to DVD-RAM discs.
To record to a DVD-RAM, use Explorer or other utility.
■ When you back up a DVD disc, be sure the source drive supports recording to DVD-R/-R DL/-RW or DVD+R/+R DL/+RW discs. If the source drive does not support recording to DVD-R/-RW or DVD+R/
+RW discs, it might not be backed up correctly.
■ When you back up a DVD-R, DVD-RW, DVD+R or DVD+RW, be sure to use the same type of disc.
■ You cannot partially delete any data written to a CD-RW, DVD-RW or
DVD+RW disc.
■ Only DVD Super Multi (+-R DL) Drive
When TOSHIBA Disc Creator launched, it is possible that the disc tray of the DVD drive with the disc loaded is unable to be ejected even the
"Eject" button is pressed. To solve this problem, please click on the
"eject" button ( ) on the TOSHIBA Disc Creator main screen, or right click on the icon of the DVD drive where the disc loaded, select "Eject" of the pop-up menu under "My Computer" or "Explore".
Data Verification
To verify that data is written or rewritten correctly, follow the steps below before you write or rewrite a Data CD/DVD.
1. Click the Options button ( ) on the TOSHIBA Disc Creator Assist to open the Options panels.
2. Select the Data in the left-side menu.
3. Mark the Verify data written to the disc after burning check box in the
Data Options.
4. Click the OK button.
Video
You can record video using Ulead DVD MovieFactory
®
for TOSHIBA.
User’s Manual 4-14
advertisement
Related manuals
advertisement