advertisement
▼
Scroll to page 2
of
74
1-3. Basic Operations and Functions
●
Basic operation of the Setting menu
1.
Displaying the Setting menu
1. Press on the remote control. The Setting menu appears.
2.
Adjusting/Setting
1. Choose a menu to adjust/set with , , and then press . The Sub menu appears.
2. Choose an item to adjust/set with , , and then press appears.
. The adjustment/setting menu
3. Adjust/set the selected item with , , , , and then press
3.
Exiting
1. Press .
Note
• To go back to the previous menu, press .
.
12
Chapter 1 Introduction
advertisement
Key Features
- 60.5 cm (23.8") LED IPS
- Full HD 1920 x 1080 pixels 16:9
- 4.9 ms 250 cd/m² 5000:1
- 15 W
Related manuals
advertisement
Table of contents
- 8 Front
- 9 Rear
- 11 Before Using Remote Control
- 12 Basic operation of the Setting menu
- 13 Functions
- 14 DVI-D Input and HDMI Input (PC signal)
- 14 HDMI Input (video signal)
- 16 To select the display mode (Color Mode)
- 17 To perform advanced adjustments
- 17 Adjustable settings in each mode
- 18 To adjust brightness
- 18 To Adjust Black Level “Black Level”
- 18 To adjust contrast
- 19 To adjust the color saturation
- 19 To adjust hue
- 20 To adjust color temperature
- 20 To adjust gamma
- 21 To adjust gain
- 21 To reduce noise
- 22 To set the enhancement ratio of ContrastEnhancer
- 22 To set overdrive intensity
- 24 DVI-D Input and HDMI Input (PC signal)
- 25 HDMI Input (video signal)
- 26 To modify blurred characters/lines
- 27 To turn the volume up/down
- 28 To mute the sound temporarily
- 30 To reset the color adjustments
- 31 To reset all adjustments to the default settings
- 35 Monitor
- 36 To change the exiting method from the power saving mode
- 36 Audio Output
- 37 USB
- 40 To switch among input signals
- 51 Required System Environment
- 51 Connection procedure (Setup of USB function)