advertisement
●
To adjust gain
The brightness of each color component red, green, and blue is called “Gain”. You can change the hue of “white” by adjusting gain.
Adjustable range
0 to 100
Procedure
1. Choose “Color” in the Setting menu, and press .
2. Choose “Advanced Settings” in the “Color” menu, and press
3. Choose “Gain” in the “Advanced Settings” menu, and press
The “Gain” menu appears.
4. Adjust gain with or for each of red, green, and blue.
5. Press to exit the adjustment.
.
.
Attention
• Using this function may make some color gradations unavailable for display.
Note
• The value of gain changes with that of color temperature.
• When gain is changed, the color temperature is changed to “Off”.
●
To reduce noise
It is possible to reduce block noise (mosaic pattern) that is experienced when displaying compressed videos.
Procedure
1. Choose “Color” in the Setting menu, and press .
2. Choose “Advanced Settings” in the “Color” menu, and press .
3. Choose “Noise Reduction” in the “Advanced Settings” menu, and press
The “Noise Reduction” menu appears.
4. Select “Enable” or “Disable” with or .
5. Press to exit the adjustment.
.
Attention
• When “Noise Reduction” is set to “Enable,” details of the image can be lost.
Chapter 2 Adjusting Screens
21
advertisement
Key Features
- 60.5 cm (23.8") LED IPS
- Full HD 1920 x 1080 pixels 16:9
- 4.9 ms 250 cd/m² 5000:1
- 15 W
Related manuals
advertisement
Table of contents
- 8 Front
- 9 Rear
- 11 Before Using Remote Control
- 12 Basic operation of the Setting menu
- 13 Functions
- 14 DVI-D Input and HDMI Input (PC signal)
- 14 HDMI Input (video signal)
- 16 To select the display mode (Color Mode)
- 17 To perform advanced adjustments
- 17 Adjustable settings in each mode
- 18 To adjust brightness
- 18 To Adjust Black Level “Black Level”
- 18 To adjust contrast
- 19 To adjust the color saturation
- 19 To adjust hue
- 20 To adjust color temperature
- 20 To adjust gamma
- 21 To adjust gain
- 21 To reduce noise
- 22 To set the enhancement ratio of ContrastEnhancer
- 22 To set overdrive intensity
- 24 DVI-D Input and HDMI Input (PC signal)
- 25 HDMI Input (video signal)
- 26 To modify blurred characters/lines
- 27 To turn the volume up/down
- 28 To mute the sound temporarily
- 30 To reset the color adjustments
- 31 To reset all adjustments to the default settings
- 35 Monitor
- 36 To change the exiting method from the power saving mode
- 36 Audio Output
- 37 USB
- 40 To switch among input signals
- 51 Required System Environment
- 51 Connection procedure (Setup of USB function)