advertisement
▼
Scroll to page 2
of
74
●
To modify blurred characters/lines
When an image is displayed with a resolution other than recommended, the characters or lines of the displayed image may blur.
Attention
• Smoothing setting may not be required depending on the display resolution. (You cannot choose the smoothing icon.)
Adjustable range
1 to 5
Procedure
1. Choose “Screen” in the Setting menu, and press
2. Choose “Smoothing” in the “Screen” menu, and press
The “Smoothing” menu appears.
3. Use or for adjustment.
4. Press to exit the adjustment.
.
.
26
Chapter 2 Adjusting Screens
advertisement
Key Features
- 60.5 cm (23.8") LED IPS
- Full HD 1920 x 1080 pixels 16:9
- 4.9 ms 250 cd/m² 5000:1
- 15 W
Related manuals
advertisement
Table of contents
- 8 Front
- 9 Rear
- 11 Before Using Remote Control
- 12 Basic operation of the Setting menu
- 13 Functions
- 14 DVI-D Input and HDMI Input (PC signal)
- 14 HDMI Input (video signal)
- 16 To select the display mode (Color Mode)
- 17 To perform advanced adjustments
- 17 Adjustable settings in each mode
- 18 To adjust brightness
- 18 To Adjust Black Level “Black Level”
- 18 To adjust contrast
- 19 To adjust the color saturation
- 19 To adjust hue
- 20 To adjust color temperature
- 20 To adjust gamma
- 21 To adjust gain
- 21 To reduce noise
- 22 To set the enhancement ratio of ContrastEnhancer
- 22 To set overdrive intensity
- 24 DVI-D Input and HDMI Input (PC signal)
- 25 HDMI Input (video signal)
- 26 To modify blurred characters/lines
- 27 To turn the volume up/down
- 28 To mute the sound temporarily
- 30 To reset the color adjustments
- 31 To reset all adjustments to the default settings
- 35 Monitor
- 36 To change the exiting method from the power saving mode
- 36 Audio Output
- 37 USB
- 40 To switch among input signals
- 51 Required System Environment
- 51 Connection procedure (Setup of USB function)