advertisement
![To adjust brightness. Eizo FS2434 | Manualzz To adjust brightness. Eizo FS2434 | Manualzz](http://s3.manualzz.com/store/data/051856477_1-9362729bd6cacb9cc18dbfdd8e796832-360x466.png)
●
To adjust brightness
The screen brightness is adjusted by changing the brightness of the backlight (light source from the
LCD back panel).
Adjustable range
0 to 100
Procedure
1. Press or .
The Brightness menu appears.
2. Use or for adjustment.
3. Press to exit.
Note
• If you feel that the image is too dark even if the brightness is set to 100, adjust the contrast.
• Alternatively, you can use “Brightness” under “Color” in the Adjustment menu to adjust it.
●
To Adjust Black Level “Black Level”
You can adjust the level of brightness at the black part of an image by adjusting the black level.
Please use a black test pattern or background for adjustment of the black level.
Adjustable range
0 to 100
Procedure
1. Choose “Color” in the Setting menu, and press
2. Choose “Black Level” in the “Color” menu, and press
The “Black Level” menu appears.
3. Use or for adjustment.
4. Press to exit the adjustment.
.
.
Note
• After completing black level adjustment, readjust the contrast as appropriate.
●
To adjust contrast
The brightness of the screen is adjusted by varying the video signal level.
Adjustable range
0 to 100
Procedure
1. Choose “Color” in the Setting menu, and press
2. Choose “Contrast” in the “Color” menu, and press
The “Contrast” menu appears.
3. Use or for adjustment.
4. Press to exit the adjustment.
.
.
Note
• In the contrast of 50, every color gradation is displayed (for PC input signal only).
• When adjusting the monitor, it is recommended to perform the brightness adjustment which may not lose the gradation characteristics, prior to the contrast adjustment.
• Perform the contrast adjustment in the following cases.
When you feel the image is too dark even if the brightness is set to 100 (Set the contrast to higher than 50.)
18
Chapter 2 Adjusting Screens
advertisement
Key Features
- 60.5 cm (23.8") LED IPS
- Full HD 1920 x 1080 pixels 16:9
- 4.9 ms 250 cd/m² 5000:1
- 15 W
Related manuals
advertisement
Table of contents
- 8 Front
- 9 Rear
- 11 Before Using Remote Control
- 12 Basic operation of the Setting menu
- 13 Functions
- 14 DVI-D Input and HDMI Input (PC signal)
- 14 HDMI Input (video signal)
- 16 To select the display mode (Color Mode)
- 17 To perform advanced adjustments
- 17 Adjustable settings in each mode
- 18 To adjust brightness
- 18 To Adjust Black Level “Black Level”
- 18 To adjust contrast
- 19 To adjust the color saturation
- 19 To adjust hue
- 20 To adjust color temperature
- 20 To adjust gamma
- 21 To adjust gain
- 21 To reduce noise
- 22 To set the enhancement ratio of ContrastEnhancer
- 22 To set overdrive intensity
- 24 DVI-D Input and HDMI Input (PC signal)
- 25 HDMI Input (video signal)
- 26 To modify blurred characters/lines
- 27 To turn the volume up/down
- 28 To mute the sound temporarily
- 30 To reset the color adjustments
- 31 To reset all adjustments to the default settings
- 35 Monitor
- 36 To change the exiting method from the power saving mode
- 36 Audio Output
- 37 USB
- 40 To switch among input signals
- 51 Required System Environment
- 51 Connection procedure (Setup of USB function)