advertisement
![To adjust color temperature. Eizo FS2434 | Manualzz To adjust color temperature. Eizo FS2434 | Manualzz](http://s3.manualzz.com/store/data/051856477_1-9362729bd6cacb9cc18dbfdd8e796832-360x466.png)
●
To adjust color temperature
Color temperature can be adjusted.
The color temperature is normally used to express the hue of “White” and/or “Black” by a numerical value. The value is expressed in degrees “K” (Kelvin).
The screen becomes reddish at a low color temperature, and bluish at a high color temperature, like the flame temperature. A gain preset value is set for each color temperature setting value.
Adjustable range
Off, 4000K-10000K (specified by every 500K unit, including 9300K)
Procedure
1. Choose “Color” in the Setting menu, and press
2. Choose “Temperature” in the “Color” menu, and press
.
The “Temperature” menu appears.
3. Use or for adjustment.
4. Press to exit the adjustment.
.
Note
• The value shown in “K” is available only as reference.
• “Gain” allows you to perform more advanced adjustment (see “To adjust gain” (page 21)
).
• If you set to “Off”, the image is displayed in the preset color of the monitor (Gain: 100 for each RGB).
• When gain is changed, the color temperature is changed to “Off”.
●
To adjust gamma
Gamma can be adjusted. The brightness of the monitor varies depending on the input signal, however, the variation rate is not proportional to the input signal. To keep the balance between the input signal and the brightness of the monitor is called as “Gamma correction”.
Adjustable range
1.8, 2.0, 2.2, 2.4, 2.6, 2.8, Power, RTS
Procedure
1. Choose “Color” in the Setting menu, and press .
2. Choose “Advanced Settings” in the “Color” menu, and press
3. Choose “Gamma” in the “Advanced Settings” menu, and press
The “Gamma” menu appears.
4. Use or for adjustment.
5. Press to exit the adjustment.
.
.
Note
• Choosing “Power” will help to sharpen halftone images by increasing their contrast.
• “RTS” is suitable for display of RTS games and brightens low gradation areas of the screen.
20
Chapter 2 Adjusting Screens
advertisement
Key Features
- 60.5 cm (23.8") LED IPS
- Full HD 1920 x 1080 pixels 16:9
- 4.9 ms 250 cd/m² 5000:1
- 15 W
Related manuals
advertisement
Table of contents
- 8 Front
- 9 Rear
- 11 Before Using Remote Control
- 12 Basic operation of the Setting menu
- 13 Functions
- 14 DVI-D Input and HDMI Input (PC signal)
- 14 HDMI Input (video signal)
- 16 To select the display mode (Color Mode)
- 17 To perform advanced adjustments
- 17 Adjustable settings in each mode
- 18 To adjust brightness
- 18 To Adjust Black Level “Black Level”
- 18 To adjust contrast
- 19 To adjust the color saturation
- 19 To adjust hue
- 20 To adjust color temperature
- 20 To adjust gamma
- 21 To adjust gain
- 21 To reduce noise
- 22 To set the enhancement ratio of ContrastEnhancer
- 22 To set overdrive intensity
- 24 DVI-D Input and HDMI Input (PC signal)
- 25 HDMI Input (video signal)
- 26 To modify blurred characters/lines
- 27 To turn the volume up/down
- 28 To mute the sound temporarily
- 30 To reset the color adjustments
- 31 To reset all adjustments to the default settings
- 35 Monitor
- 36 To change the exiting method from the power saving mode
- 36 Audio Output
- 37 USB
- 40 To switch among input signals
- 51 Required System Environment
- 51 Connection procedure (Setup of USB function)