Monitor. Eizo FS2434

Chapter 5 Power Saving Functions

5-1. Setting Power Saving

●

Monitor

This function allows you to specify whether to set the monitor into the power saving mode, depending on the state of an external device connected to it. When the monitor has shifted to the power saving mode, the images on the screen are not displayed.

Attention

• When not using the monitor, you can turn off the main power supply or disconnect the power plug so that the power is cut completely.

• Power consumption varies even when the stereo mini jack cable is connected.

Note

• The monitor changes to the power saving mode about 15 seconds after the signal input ceases to be detected.

Procedure

1. Choose “PowerManager” in the Setting menu, and press

2. Choose “Power Save” in the “PowerManager” menu, and press

.

The “Power Save” menu appears.

3. Select “Enable” or “Disable” with or .

4. Press to exit the adjustment.

.

Power Saving System

When the external device connected is a PC

This monitor complies with the DVI DMPM standard.

PC

On

Power saving mode

Power Off

Monitor

Operating

Power saving mode

Power saving mode

Power Indicator

White

Orange

Orange

When the external device connected is not a PC

Power On

Power Off

Ext. Device Monitor

Operating

Power saving mode

Power Indicator

White

Orange

Attention

• When all the conditions below are met, the monitor does not change to the power saving mode even if “Power

Save” is set to “Enable”:

- “Power Save” for Sound is set to “Sound On” (

“Audio Output” (page 36) )

-

In the mute state ( “To mute the sound temporarily” (page 28) )

In these cases, reset the mute.

Exiting the power saving mode

If the monitor receives input, it automatically exits the power saving mode and returns to the normal display mode.

Chapter 5 Power Saving Functions

35