advertisement
![Sample L ayouts. Petsafe In-Ground Fence System | Manualzz Sample L ayouts. Petsafe In-Ground Fence System | Manualzz](http://s1.manualzz.com/store/data/006818269_1-14e4f8f2f3db248a4877c6cb68d8691d-360x466.png)
6
Sample Layouts
Sample 1:
Perimeter Loop
(Single Loop)
The Perimeter
Loop is the most common layout. This will allow your pet to freely and safely roam your entire property (
2C
). It can also protect gardens, pools and landscaping (
2D
).
B
A
E
C
D
Sample 2 (2E): Perimeter Loop Using Existing
Fence (Single Loop)
This layout allows you to include your existing fence as part of your layout and keep your pet from jumping out or digging under your existing fence. It reduces the amount of wire which will need to be buried. From the
Fence Transmitter, run the wire to
A
,
A
to
B
,
B
to
C
,
C
to
D
,
D
to
E
,
E
to
A
, twist the wires from
A
back to the
Fence Transmitter. See the “Install the Boundary Wire” section for more information on attaching the wire to a fence.
Double Loop
A Double Loop must be used when you are not establishing the Boundary Zone on all sides of your property.
When using a Double Loop, the Boundary Wire must be separated by a minimum of
THREE TO FIVE FEET
to avoid canceling the signal. Remember that a Double Loop will require twice as much wire.
D
C
F
E
B
A
F
E
B
A
D
C
Sample 3
(
2F
)
: Front or Back
Yard Only (Double Loop)
From the Fence Transmitter, run the wire to
A
,
A
to
B
,
B
to
C
,
C
to
D
,
D
to
E
,
E
to
F
, make a Uturn and follow your path all the way back to
A,
keeping the wire separated
three to fi ve feet
. Twist the wire from
A
back to the Fence
Transmitter.
A
3-5'
B
Sample 4
(
2G
)
: Front
Boundary Only
(Double Loop)
From the Fence Transmitter, run the wire to
A
,
A
to
B
,
B
back to
A
keeping the wire separated
three to fi ve
feet.
Twist the wire from
A
back to the Fence Transmitter.
B
E
3-5'
A
D
C
Sample 5
(
2H
)
: Lake Access
(Double Loop)
From the Fence Transmitter, run the wire to
A
,
A
to
B
, make a U-turn and go to
C
,
C
to
D
,
D
to
E,
make a U-turn and follow your path all the way back to
A
keeping wire separated
three to fi ve feet
.
Twist the wire from
A
back to the F ence Transmitter.
1-800-732-2677 (US), 1-800-457-3911 (Canada)
advertisement
Related manuals
advertisement
Table of contents
- 3 Components
- 3 Other Items You May Need
- 4 Key Defi nitions
- 5 Locate the Fence Transmitter
- 5 Lay Out the System
- 6 Sample L ayouts
- 7 Position the Boundary Wire
- 8 Connect the Wires to the Fence Transmitter
- 10 Set the Boundary Width and Test the Receiver Collar
- 11 Install the Boundary Wire
- 12 Place the Boundary Flags
- 12 Fit the Receiver Collar
- 14 Be Patient With Your Pet
- 14 Day 1 - Boundary Flag Awareness
- 15 Days 2 thru 4 - Continue Boundary Flag Awareness
- 15 Days 5 thru 8 - Distraction Phase
- 16 Days 9 thru 14 - Unleashed Supervision
- 16 Days 15 thru 30 - Pet Monitoring
- 16 Taking Your Pet Out of the Pet Area
- 17 Accessories
- 18 Troubleshooting
- 19 Short Loop Test
- 20 To Locate a Break in the Boundary Wire
- 20 Terms of Use and Limitation of Liability
- 21 Caution
- 21 Product Warranty
- 64 Layout Gr id
- 64 Mounting Template
- 23 Composants
- 23 Autres éléments pouvant s’avérer nécessaires
- 24 Défi nitions
- 25 Emplacement de l’émetteur de clôture
- 25 Schéma du système
- 26 Exemples de schémas
- 28 Branchement des fi ls à l’émetteur de clôture
- 31 Installation du fi l p ériphérique
- 32 Ajustement du collier récepteur
- 34 Soyez patient avec votre animal
- 34 Jour 1 – Familiarisation avec les fanions de délimitation
- 35 Jours 2 à 4 – Familiarisation avec les fanions de délimitation (suite)
- 35 Jours 5 à 8 – Phase de distraction
- 36 Jours 9 à 14 – Supervision sans laisse
- 36 Jours 15 à 30 – Observation de l’animal
- 36 Pour sortir votre animal de la zone autorisée
- 37 Accessoires
- 38 Dépannage
- 39 Test en boucle courte
- 40 Repérage des ruptures de fi l
- 40 Conditions d’utilisation et limite de responsabilité
- 41 Mise en garde
- 41 Garantie du produit
- 64 Grille de schéma
- 64 Gabarit de montage
- 43 Componentes
- 43 Otras herramientas que puede necesitar
- 44 Defi niciones im portantes
- 45 Localice el transmisor de cerca
- 45 Prepare el sistema
- 46 Ejemplos de diseños
- 47 Coloque el cable delimitador
- 48 Conecte los cables al transmisor de cerca
- 49 Establezca la amplitud de límites y pruebe el collar receptor
- 51 Instale el cable delimitador
- 52 Coloque las banderas delimitadoras
- 52 Ajuste el collar receptor
- 54 Tenga paciencia con su mascota
- 54 Día 1: conciencia de las banderas delimitadoras
- 55 Días 2 a 4: conciencia de las banderas delimitadoras (continuación)
- 55 Días 5 a 8: etapa de distracción
- 56 Días 9 a 14: supervisión libre
- 56 Días 15 a 30: observación de la mascota
- 56 Saque a la mascota de su área
- 57 Accesorios
- 58 Resolución de problemas
- 59 Prueba de circuito corto
- 60 Para encontrar una separación en el cable delimitador
- 60 Términos de uso y limitación de responsabilidad
- 61 Precaución
- 61 Garantía del producto
- 64 Rejilla de diseño
- 64 Plantilla de instalación