advertisement
Setting up your TV
Menu system (general instructions)
After installing the batteries and programming the remote control, you will need to set some preferences on your TV using the menu system.
You can access the menus using the buttons on the TV front panel or remote control. Following are general instructions for using the menu system:
1. Press MENU and then
T or
S
to select a menu (Picture, Audio, Setup,
Preference, or Closed Caption, as shown in the menu system overview, below).
2. Press s
or t
to select the function you want to adjust in the menu.
3. Press
T or
S
to adjust the selected function.
Note: The
T S
buttons function as FAV st
(favorite channel) buttons when no menu is on-screen.
4. When you make a menu selection, your changes occur immediately.
You do not have to press MENU or EXIT to save your changes.
Note: The TV front panel does not have an EXIT button.
5. On-screen menus close automatically if no adjustments are made within 15 seconds. To close an on-screen menu instantly, press EXIT on the remote control.
TV Front Panel
MENU TV/VIDEO VOLUME
MENU
CHANNEL
T S t s
POWER
RECALL
MENU
} stT S
EXIT
Menu system overview
PICTURE menu
PICTURE
CONTRAST 50
BRIGHTNESS 50
SHARPNESS 50
COLOR
TINT
RESET
50
0
AUDIO
MOVE [ ] ADJUST [ ]
BASS
[STR] SAP MONO
50
TREBLE
BALANCE
50
0
SURROUND: [ON] OFF
SET UP
AUDIO menu
SET UP menu (1)
MOVE [ ] ADJUST
[ENGLISH] FRANCAIS ESPANOL
TV/CABLE:
CH PROGRAM
[TV] CABLE
ADD/ERASE:
V-CHIP CONTROL
[ADD] ERASE
SET UP
MORE
SET UP menu (2)
MORE
TIMER: 0 MIN
DEMO:
FAVORITE CH
START [STOP]
PREFERENCE menu
PREFERENCE
COLOR TEMPERATURE
[COOL] MEDIUM WARM
PICTURE PREFERENCE
[SPORTS] STANDARD MOVIE MEMORY
CLOSED CAPTION menu
MOVE [ ] SELECT
CLOSED CAPTI0N
C1
T2
C2
T3
C3
T4
C4
[OFF]
T1
MOVE [ ] SELECT [ ]
15
advertisement
Related manuals
advertisement
Table of contents
- 4 Important safety information
- 6 Introduction
- 6 Exploring your new TV
- 6 Selecting a location for your TV
- 7 Connecting your TV
- 7 Connecting a VCR
- 7 Connecting a cable converter box
- 8 Connecting a cable converter box and a VCR
- 8 Connecting a satellite receiver and a VCR
- 9 (component video) and a VCR
- 9 Connecting two VCRs
- 10 Using the remote control
- 10 Preparing the remote control for use
- 10 Installing the remote control batteries
- 11 Location of controls on TV and remote control
- 12 DVD player, or HTIB (home theater in a box)
- 13 Remote control codes
- 14 DVD player, or HTIB (home theater in a box)
- 15 Setting up your TV
- 15 Menu system (general instructions)
- 16 Changing the on-screen display language
- 16 Selecting the signal source
- 16 Programming channels into the TV’s memory
- 16 Programming channels automatically
- 17 Adding and erasing channels manually
- 17 Changing channels
- 18 Using the TV’s features
- 18 Adjusting the channel settings
- 18 Switching between two channels
- 18 Programming your favorite channels
- 19 Using the V-Chip Control (blocking) feature
- 19 Selecting a PIN code
- 20 Changing your PIN code
- 21 Blocking programs by ratings
- 21 Ratings definitions (MPAA, Youth TV, TV)
- 22 Unblocking programs temporarily
- 23 Blocking unrated movies and programs
- 24 Blocking channels
- 25 Adjusting the picture
- 25 Adjusting the picture quality
- 25 Selecting the color temperature
- 26 Selecting the picture preference
- 26 Displaying on-screen information
- 26 Setting the off timer
- 26 Auto power off
- 27 Using the closed caption feature
- 28 Adjusting the sound
- 28 Muting the sound
- 28 Selecting stereo/SAP broadcasts
- 29 Adjusting the sound quality
- 29 Using the surround sound feature
- 30 Viewing the demonstration (DEMO) mode
- 30 Understanding the last mode memory feature
- 31 Appendix
- 31 Specifications
- 32 Troubleshooting
- 33 Limited United States warranty
- 34 Limited Canada warranty