Adjusting the sound quality. Toshiba COLOR TELEVISION, 32A33, 32A43, 36A43
Add to My manuals36 Pages
advertisement
Adjusting the sound quality
You can change your TV’s sound quality by adjusting the bass, treble, and balance.
To adjust the sound quality:
1. Press MENU .
2. Press x or • to highlight the AUDIO menu.
3. Press y or z to highlight the quality you want to adjust (BASS,
TREBLE, or BALANCE).
4. Press x or • to adjust the level: x makes the sound quality weaker or increases the balance in the right channel, depending on the item selected.
• makes the sound quality stronger or increases the balance in the left channel, depending on the item selected.
AUDIO
MTS: [STR] SAP MONO
BASS 50 –
TREBLE
BALANCE
50
0
SURROUND: [ON] OFF
MOVE [ ] ADJUST [ ]
+
Using the surround sound feature
The surround sound feature expands the audio listening field wider and deeper to create exceptional sound quality from the TV speakers.
This feature uses stereo signals from a TV broadcast or video input.
To turn surround sound on:
1. Press MENU .
2. Press x or • to highlight the AUDIO menu.
3. Press y or z to highlight MTS.
4. Press x or • to highlight STR.
5. Press z to highlight SURROUND.
6. Press x or • to highlight ON.
AUDIO
MTS:
BASS
TREBLE
BALANCE
[STR] SAP MONO
50
50
0
SURROUND: [ON] OFF
MOVE [ ] SELECT [ ]
To turn surround sound off:
Highlight OFF in step 6 above.
Note: In general, if you leave the surround sound feature ON, the TV will automatically output the type of sound being broadcast (surround stereo or mono).
Note:
To reset the audio adjustments (bass, treble, and balance) to the factory settings, select
RESET in the PICTURE menu (see note on page 25).
MENU
} stT S
29
advertisement
Related manuals
advertisement
Table of contents
- 4 Important safety information
- 6 Introduction
- 6 Exploring your new TV
- 6 Selecting a location for your TV
- 7 Connecting your TV
- 7 Connecting a VCR
- 7 Connecting a cable converter box
- 8 Connecting a cable converter box and a VCR
- 8 Connecting a satellite receiver and a VCR
- 9 (component video) and a VCR
- 9 Connecting two VCRs
- 10 Using the remote control
- 10 Preparing the remote control for use
- 10 Installing the remote control batteries
- 11 Location of controls on TV and remote control
- 12 DVD player, or HTIB (home theater in a box)
- 13 Remote control codes
- 14 DVD player, or HTIB (home theater in a box)
- 15 Setting up your TV
- 15 Menu system (general instructions)
- 16 Changing the on-screen display language
- 16 Selecting the signal source
- 16 Programming channels into the TV’s memory
- 16 Programming channels automatically
- 17 Adding and erasing channels manually
- 17 Changing channels
- 18 Using the TV’s features
- 18 Adjusting the channel settings
- 18 Switching between two channels
- 18 Programming your favorite channels
- 19 Using the V-Chip Control (blocking) feature
- 19 Selecting a PIN code
- 20 Changing your PIN code
- 21 Blocking programs by ratings
- 21 Ratings definitions (MPAA, Youth TV, TV)
- 22 Unblocking programs temporarily
- 23 Blocking unrated movies and programs
- 24 Blocking channels
- 25 Adjusting the picture
- 25 Adjusting the picture quality
- 25 Selecting the color temperature
- 26 Selecting the picture preference
- 26 Displaying on-screen information
- 26 Setting the off timer
- 26 Auto power off
- 27 Using the closed caption feature
- 28 Adjusting the sound
- 28 Muting the sound
- 28 Selecting stereo/SAP broadcasts
- 29 Adjusting the sound quality
- 29 Using the surround sound feature
- 30 Viewing the demonstration (DEMO) mode
- 30 Understanding the last mode memory feature
- 31 Appendix
- 31 Specifications
- 32 Troubleshooting
- 33 Limited United States warranty
- 34 Limited Canada warranty