advertisement
Adjusting the picture
Adjusting the picture quality
You can adjust the picture’s contrast, brightness, sharpness, color, and tint. Your picture quality adjustments are stored automatically in the
TV’s memory. You can keep these settings or choose preset options in the PREFERENCE menu (see “Selecting the color temperature” below, and “Selecting the picture preference” on the next page.)
To adjust the picture quality:
1. Press MENU .
2. Press x or • to highlight the PICTURE menu.
3. Press y or z until the quality you want to adjust is highlighted.
PICTURE
CONTRAST 100
BRIGHTNESS 50
SHARPNESS 50
COLOR 50
TINT 0
RESET
–
MOVE [ ] ADJUST [ ]
+
Note:
To reset the picture (and audio) adjustments to the factory settings, select RESET in the PICTURE menu, and then press • .
4. Press x or • to adjust the level, as described in the following table:
Selection
Contrast
Brightness
Sharpness
Color
Tint
Pressing
Lower
Darker
Softer
Paler
Reddish
Higher
Lighter
Sharper
Deeper
Greenish
Selecting the color temperature
You can change the picture quality by selecting from three preset color temperatures—cool, medium, and warm.
To select the color temperature:
1. Press MENU .
2. Press x or • to highlight the PREFERENCE menu.
3. Press y or z to highlight COLOR TEMPERATURE.
PREFERENCE
COLOR TEMPERATURE
[COOL] MEDIUM WARM
PICTURE PREFERENCE
[SPORTS] STANDARD MOVIE MEMORY
MOVE [ ] SELECT [ ]
4. Press x or • to highlight the mode you prefer, as described in the following table:
Mode
Cool
Medium
Warm
Picture Quality
Blueish
Neutral
Reddish
25
MENU
} stT S
advertisement