Changing the on-screen display language. Toshiba COLOR TELEVISION, 32A33, 32A43, 36A43

Add to My manuals
36 Pages

advertisement

Changing the on-screen display language. Toshiba COLOR TELEVISION, 32A33, 32A43, 36A43 | Manualzz

Changing the on-screen display language

You can choose from three different languages (English, French, or

Spanish) for the on-screen display of menus and messages.

To select an on-screen display language:

1. Press MENU .

2. Press x or • until the SET UP menu appears.

3. Press y or z to highlight LANGUAGE.

4. Press x or • to highlight your desired language.

SET UP

LANGUAGE:

[ENGLISH] FRANCAIS ESPANOL

[TV] CABLE TV/CABLE:

CH PROGRAM

ADD/ERASE:

V-CHIP CONTROL

MORE

[ADD] ERASE

CONFIGURATION

LANGUE:

ENGLISH [FRANCAIS] ESPANOL

[TV] CABLE TV/CABLE:

PROGRAMME CAN

AJOUT/EFF:

CONTROLE V-CHIP

PLUS

[AJOUT] EFF

TV Front Panel

TV/VIDEO CHANNEL s

/ t

MENU TV/VIDEO VOLUME CHANNEL POWER

MENU

T S ts

Selecting the signal source

You can use the TV/VIDEO button on the remote control or TV to select the signal source connected to your TV.

To change the signal source:

Repeatedly press TV/VIDEO to select either TV, VIDEO 1,

VIDEO 2, or VIDEO 3 (32A43 and 36A43 only). The selected signal source is highlighted on-screen.

TV

VIDEO 1

VIDEO 2

TO SELECT PUSH TV/VIDEO

32A33

To verify the signal source:

Press RECALL .

TV

VIDEO 1

VIDEO 2

VIDEO 3

TO SELECT PUSH TV/VIDEO

32A43 and 36A43

Programming channels into the TV’s memory

When you press CHANNEL ▲▼ on the TV or remote control, the TV stops only on the channels stored in the TV’s memory.

Note: To tune the TV to a channel not programmed into the memory, use the

CHANNEL NUMBERS on the remote control.

Follow the steps below and on the next page to program channels into the TV’s memory.

Programming channels automatically

Your TV can automatically detect all active channels in your area and store them in the TV’s memory. After the channels are stored automatically, you can manually add or erase individual channels

(see page 17).

To program channels automatically:

1. Press MENU .

2. Press x or • to highlight the SET UP menu.

RECALL

TV/VIDEO

}

Channel

Numbers

MENU

} stT S

CHANNEL yz

16

advertisement

Related manuals

Download PDF

advertisement

Table of contents