advertisement
Using the TV’s features
Adjusting the channel settings
Switching between two channels
To switch between two channels without entering a channel number:
1. Select the first channel you want to view.
2. Select a second channel using the CHANNEL NUMBERS
(0–9 and 100).
3. Press CH RTN (channel return). The previous channel will display.
Every time you press CH RTN , the TV will switch back and forth between the last two channels you tuned the TV to.
Programming your favorite channels
FAV ts
The Favorite Channel feature allows you to use the FAV ▼▲ buttons on the remote control to cycle through your favorite channels, skipping over channels you do not normally watch. You can program a maximum of
12 favorite channels.
Note: You can still use CHANNEL ▲▼ to cycle through all the channels you programmed into the TV’s memory on page 16.
To program your favorite channels:
1. Tune the TV to a channel you want to program as a favorite channel.
2. Press MENU .
3. Press x or • to highlight the SET UP menu.
4. Press y or z to highlight FAVORITE CH.
SET UP
MORE
TIMER:
DEMO:
FAVORITE CH
0 MIN
START [STOP]
MOVE [ ] START [ ]
5. Press x or • to display the FAVORITE CH menu.
6. Press x or • to highlight SET.
7. Press z to add the current channel to the list.
8. Press EXIT .
SET UP
FAVORITE CH
[SET ] CLEAR
2
0
5
0
6
0
11
0
0 0 0 0
[TV: CYAN, CABLE: BLUE]
SELECT [ ] SET [ ]
9. Repeat steps 1–8 for up to 12 channels.
(Continued on next page)
18
}
Channel
Numbers
CH RTN
MENU
} stT S
EXIT
Channel yz
advertisement