WiFi connection of the Hercules WiFi Extender to your Livebox via QuickAccess. Hercules HWGEXT-54-LB

Add to My manuals
82 Pages

advertisement

WiFi connection of the Hercules WiFi Extender to your Livebox via QuickAccess. Hercules HWGEXT-54-LB | Manualzz

Hercules HWGEXT-54-LB

2.2.6.

WiFi connection of the Hercules WiFi Extender to your

Livebox via QuickAccess

The Hercules QuickAccess utility is launched automatically, allowing you to configure your Hercules WiFi

Extender.

If you have enabled the Access Manager in your Web browser in order to control access to certain sites which may offer contents of a violent or otherwise undesirable nature, you will not be able to immediately connect to WiFi Extender Manager.

When launching QuickAccess, the Access Manager will prompt you for authorization to visit the website http://192.168.1.254

. This site corresponds to the WiFi Extender Manager interface associated with your

Hercules WiFi Extender. To access it, simply accept the authorization to display this site. The WiFi

Extender’s address will be stored in your Web browser, and thereafter you will be able to directly access WiFi

Extender Manager.

10/82 – User Manual

- Follow the on-screen instructions:

Hercules HWGEXT-54-LB

ƒ Select the WiFi network transmitted by your

Livebox.

ƒ Verify that the WiFi network's SSID corresponds to the one found on the underside of your Livebox.

ƒ Click Next.

ƒ Carry out the Livebox-Hercules WiFi Extender pairing by pressing the REG button (Sagem model) or 1 button (Inventel model) on your

Livebox.

ƒ Click Next.

Note: Pairing consists of temporarily disabling the

MAC address

filtering mode on your Livebox. All devices, including your WiFi Extender, may then be added to the list of MAC addresses as long as you enter the WEP key for your Livebox (please see below).

ƒ Enter the WEP security key found on the underside of your Livebox.

ƒ Click Connect.

The Hercules WiFi Extender connects to your

Livebox.

Configuration is now complete. If it was successful, move on to Step 6: DISCONNECTION FROM

YOUR COMPUTER

. If not, click Restart to relaunch the configuration Assistant or Exit to exit the Assistant.

User Manual – 11/82

advertisement

Related manuals

advertisement

Table of contents