Other advanced options. Hercules HWGEXT-54-LB

Hercules HWGEXT-54-LB

To load a configuration:

- On the home page, click the Toolbox button.

- Select Load/Save your settings.

- Click the Browse... button.

- Select your file (Config.bin type), then click Open.

- Click Load to import the file.

This settings file will replace the existing configuration.

4.10.

Other advanced options

4.10.1.

Configuring the internal DHCP server

This chapter will explain how to change your WiFi Extender's IP address and configure the internal DHCP server, which manages the IP addresses of your computers.

To access the DHCP server configuration page:

- On the home page, click the Advanced Settings button to access the advanced settings for your WiFi network.

- On the page displayed, click the IP addressing button.

To configure the DHCP server:

- You can modify the IP Address of your Hercules

WiFi Extender (192.168.1.254, by default), its

Subnet mask (255.255.255.0, by default), and designate the gateway.

Be sure to make a note of the IP address.

74/82 – User Manual