Selective Listen-In Mode. ASL INTERCOM SMC02G

SMC02G/SMC02F/Variants - Product Manual

2.2.4.2 Selective Listen-In Mode

In Selective Listen-in mode the audio of selected zones are mixed and fed to the listen-in speakers on all off

SMC units controlled by the Router.

OFF

PA LISTEN

PA

LISTEN

BUTTON

ZONE

SELECT

BUTTON

1.

Activate the selective listen-in function by holding down the PA LISTEN button and pressing the required Zone

Select button on the primary SMC02 unit.

Listen-in is not possible while the SMC02 is used for announcements.

PRESS AND HOLD

PA LISTEN

PA

LISTEN

BUTTON

ON

ZONE

SELECT

BUTTON

2.

This will cause only the audio of the selected zone (or group of zones) to be fed to the listen-in speaker.

The PA LISTEN LED illuminates to indicate that the listen-in function is activated.

Normal paging is not possible while the listen-in function is activated.

3.

Add the audio from other zones to the mix by pressing other Zone Select buttons.

De-select zones by re-pressing the Zone Select buttons.

VOLUME

+

PA LISTEN

PA

LISTEN

BUTTON

ON

PA LISTEN

PA

LISTEN

BUTTON

OFF

4.

Adjust the audio mix volume using the PA LISTEN

VOLUME switch.

5.

Deactivate the listen-in function by re-pressing the

PA LISTEN switch.

The PA LISTEN LED will extinguish to show that the listen-in mode has been deactivated. Announcements can now be made.

Issue: 02 complete, approved

Page 18 of 60