From Marshalling Box to SMC02 Console. ASL INTERCOM SMC02G

SMC02G/SMC02F/Variants - Product Manual

3.1.2.2 From Marshalling Box to SMC02 Console

The ASL SMCLEAD is built according to the requirements below, and can be ordered separately from Application Solutions Limited in two variants:

• SMCLEAD-5M:

Five metre long lead with marshalling box connections terminated in ferrules ready for connection.

SMC02 end terminated with ITT TNM 6S16-00191SL fitted with T2P24FC1LT contacts and

TNA16CCSE00L end bell.

• SMCLEAD-20M:

Twenty metre long lead with marshalling box end clean cut, for termination to the correct length during installation.

SMC02 end terminated with ITT TNM 6S16-00191SL fitted with T2P24FC1LT contacts and

TNA16CCSE00L end bell.

The following requirement should be observed when assembling the cable for connection of the SMC02 console to the marshalling box.

Signals Cable Description Suggested Type

Microphone Audio 1 twisted pair

Listen-In Audio 1 twisted pair

Microphone Data

Other Signals

1 twisted pair

7 cores using any available pairs

LSF sheath. Multi-pair cable with overall foil screen.

Overall diameter compatible with ITT TNM 6S16-00191SL.

Connector to SMC02:

ITT TNM 6S16-00191SL fitted with T2P24FC1LT contacts and TNA16CCSE00L end bell

3.1.2.3 Cabling to an Intellevac ACU

Please refer to the Intellevac ACU Installation Guide [ Table 5-9 ].

3.1.2.4 Cabling to an VAR8-ACU

Please refer to the VAR8-ACU Installation Guide [ Table 5-6 ].

Issue: 02 complete, approved

Page 20 of 60