Installation. ASL INTERCOM SMC02G

SMC02G/SMC02F/Variants - Product Manual

3 Installation

• The SMC02 unit.

• SMC02 connection cable: ASL SMCLEAD-5M, SMCLEAD-20M, or parts to assembly such a cable.

• Suitable marshalling box for connecting the site wiring to the SMC02 connection cable.

• Zone identification labels.

A template for printing these labels is available from the “Data Downloads” page of Application Solutions website: www.asl-electronics.co.uk/downloads.

• PC and printer for completing, and printing the zone identification labels.

• A 2 mm Allen key or driver.

• A large pozidrive screwdriver.

• Suitable wire cutters, strippers and crimp tools (ITT Cannon 112108-0014 or R.S. 450-4411).

• Suitable fixings for mounting the fist microphone clip (SMC02F and SMC02FS only).

3.1.2.1 From Rack to Marshalling Box within Control Room

• Standard SMC02 Units (SMC02G/SMC02F):

Signals Cable Description

Microphone Audio 1 x 2 core, twisted, screened. 1.0 mm

Listen-In Audio 1 x 2 core, twisted, screened. 1.0 mm

Microphone Data

Other Signals

1 x 2 core, twisted, screened. 1.0 mm

1 x 7 core, screened 1.0 mm

Suggested Type

Fire Rated. MICC, Pirelli FP200 or equivalent

Fire Rated. MICC, Pirelli FP200 or equivalent

Fire Rated. MICC, Pirelli FP200 or equivalent

Fire Rated. MICC, Pirelli FP200 or equivalent

• ‘S’ Variant Paging Microphone SMC02 Units (SMC02GS/SMC02FS):

Signals Cable Description

Microphone Audio 1 x 2 core, twisted, screened. 1.0 mm

Listen-In Audio 1 x 2 core, twisted, screened. 1.0 mm

Microphone Data

Other Signals

1 x 2 core, twisted, screened. 1.0 mm

1 x 7 core, screened 1.0 mm

CAT 5 STP

CAT 5 STP

CAT 5 STP

CAT 5 STP

Suggested Type

For cable-run limitations and alternative cable types please refer to Application Solutions

Limited for advice.

!

!

For EMC compliance:

• All cable tails must be < 3 cm.

• Screened cables to be used where specified.

Issue: 02 complete, approved

Page 19 of 60