advertisement
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 11 Device manager
Shared memory
The report will be saved in a shared directory on the network. The shared directory is selected in the Edit device / Shared memory dialog
(see chapter 11.3.3, page 84) .
Copy or extract content allowed on | off (Default value: on )
If this option is activated, then content can be copied or deleted from the
PDF file.
Printing allowed on | off (Default value: on )
If this option is activated, then the PDF file can be printed.
Change the document allowed on | off (Default value: off )
If this option is activated, then the PDF file can be edited.
Add or change comments allowed on | off (Default value: on )
If this option is activated, then comments can be added to the PDF file.
11.7.2 Network printer
Printer: Edit ▶ Network printer
If you have connected your Touch Control to your network, then you can specify a network printer for your reports in this dialog.
NOTICE
If you have shared a memory location on a PC within your network and
if you have configured the Touch Control accordingly (see chapter
, then the settings for the parameters Domain , User and Password will be applied and can then no longer be modified in this dialog.
900 Touch Control ￭￭￭￭￭￭￭￭ 111
11.7 Printer
Print server
Share name
Domain
User
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
CAUTION
If the computer on which the network printer is configured does not have the same subnet as the Touch Control, then a WINS server must be present. The computer must be entered in this server. In order for the communication to work, the SMB protocol version 1 (SMBv1) must be activated. Since this function is not standard anymore in Windows
10, it has to be activated manually.
Host name of the print server or the computer on which the network printer is configured. If you are working with Windows, then you will find the host name as follows: In the Windows command prompt window, enter the command ipconfig -all . The host name is listed together with other parameters of the print server or the computer.
Do not under any circumstances enter an IP address in this input field.
Entry
Default value max. 32 characters empty
Share name of the network printer on the above-specified computer.
Please note that the Share name of a network printer often does not match the name of the printer. The share name can be found on the
Release tab in the Properties dialog of the released network printer.
Entry
Default value max. 32 characters empty
Network domain in which the above-specified computer is located. If you are working with Windows, then you will find the domain name as follows: In the Windows command window , enter the command ipconfig
-all . The domain is listed together with other parameters of the computer.
Leave the field empty if the computer is not located within a domain.
Entry
Default value max. 32 characters empty
User name of the user authorized to access the shared network printer.
Entry
Default value max. 32 characters empty
112 ￭￭￭￭￭￭￭￭ 900 Touch Control
advertisement
Key Features
- Dynamic equivalence point titration (DET)
- Monotonic equivalence point titration (MET)
- Endpoint titration (SET)
- Water determination according to Karl Fischer (KFT)
- Titration with constant maintenance of the measured value (STAT)
- Manual titration (MAT)
- Coulometric water content determination according to Karl Fischer (KFC)
- Bromine index determination (BRC)
- Intuitive touch-sensitive screen for easy operation
- Comprehensive user administration for secure data management