advertisement
![Splitting the screen. NORTHSTAR 958 | Manualzz Splitting the screen. NORTHSTAR 958 | Manualzz](http://s3.manualzz.com/store/data/063869289_1-fc32b99f53bb59dfd7f1c389bc0e1258-360x466.png)
•
•
•
•
Chapter 4 - Using the Chart Screen rotate the chart ( ROTATE key); for details, see ”Rotating the chart” starting on page 49 restart your course line from your present position to your intended waypoint ( RESTART key); for details, see
”Restarting navigation” starting on page 124 display or change the setup functions for the CHART screen ( CHART SETUP key); for details, see ”Setting up the chart screen” starting on page 53 display position details at the bottom of the screen ( MORE
INFO key)
Browse mode
Browse mode is indicated by the word BROWSE in the upper right corner of the screen. In this mode, you can perform the following functions:
958 Operator’s Manual, Rev. A
•
•
•
• view any area on the chart by moving the cursor there
( CURSOR PAD ) quickly determine distance and bearing to other points on the CHART screen ( CURSOR PAD ) split the screen ( SPLIT key) to display the chart simultaneously with radar and/or the optional sounder screen and/or a video image; for details, see ”Splitting the screen” starting on page 46 control the chart ( CONTROL key); for details, see
”Controlling the screen” starting on page 48
Page 45
Chapter 4 - Using the Chart Screen
•
•
•
• rotate the chart ( ROTATE key); for details, see ”Rotating the chart” starting on page 49 return to vessel mode ( VESSEL key) display or change the setup functions for the CHART screen ( CHART SETUP key); for details, see ”Setting up the chart screen” starting on page 53 specify points to go to on the CHART screen ( GO TO
CURSOR key)
Splitting the screen
If you have radar and/or the echo sounder installed and operational, you’ll see the SPLIT key when you view the
CHART screen; otherwise, you’ll see a VIDEO key. The following discussion assumes that the SPLIT key is available.
•
•
•
You can split the screen in the following ways:
•
•
•
Overlay video
View the chart alone
View the chart and sounder together
View the chart and radar together
View the chart, radar, and sounder together
View the radar alone
The following figure shows examples of the available screens.
Page 46 958 Operator’s Manual, Rev. A
advertisement
Related manuals
advertisement
Table of contents
- 8 1 Getting Started
- 9 Welcome to the
- 9 Using this manual
- 10 Obtaining technical support
- 12 Turning the 958 on and off
- 14 Displaying the chart screen
- 16 Using chart data
- 20 Displaying detailed position information
- 21 Using demo mode
- 23 Going to a quick waypoint now
- 26 2 Introducing the
- 27 Introducing the controls
- 28 Introducing the display screen
- 32 Introducing radar
- 32 Introducing the echo sounder
- 32 Introducing alarms, TideTrack, and video
- 33 Maintaining the
- 35 Interfacing the
- 36 3 Using the Controls
- 37 Using the PWR key
- 37 Using the five function keys
- 39 Using the CURSOR PAD
- 40 Using the SAVE key
- 40 Using the MOB key
- 41 Using the alphanumeric KEYPAD
- 42 Using the menu keys
- 43 Using the BRIGHTNESS key
- 43 Using the IN and OUT keys
- 44 4 Using the Chart Screen
- 45 Understanding electronic charts
- 46 Understanding nav aids
- 48 Zooming in and out
- 49 Controlling the cursor on the chart screen
- 51 Comparing vessel and browse modes
- 53 Splitting the screen
- 55 Controlling the screen
- 56 Rotating the chart
- 60 Setting up the chart screen
- 64 Using distance and bearing mode
- 66 5 Determining Your Position
- 67 Displaying position, COG, and speed
- 67 Using GPS
- 70 Using DGPS
- 73 Using loran
- 75 Using Phantom Loran
- 78 6 Understanding the Waypoints Function
- 79 Introducing waypoints
- 79 Displaying waypoints
- 81 Displaying waypoint coordinates
- 82 Creating new waypoints
- 87 Creating avoidance-area waypoints
- 90 Editing waypoints
- 91 Updating waypoint coordinates
- 92 Moving waypoints/routes between units
- 98 Transferring waypoints to and from a PC
- 100 7 Understanding the Routes Function
- 101 Introducing routes
- 102 Creating routes from the chart
- 104 Creating routes from a waypoints list
- 104 Saving a route as you travel
- 107 Editing a route
- 116 8 Understanding Waypoint/Route Navigation
- 117 Navigating to waypoints
- 119 Steering to a waypoint
- 123 Navigating along routes
- 125 Restarting the course line
- 128 9 Using the Nav Log
- 129 Introducing the nav log
- 130 Changing your trip
- 131 Stopping and restarting navigation
- 133 10 Understanding Radar Functions
- 134 Understanding how radar works
- 134 Displaying and controlling radar
- 136 Turning radar on and off
- 136 Overlaying radar on the chart
- 138 Changing scale and rotation
- 140 Using the main radar keys
- 142 Using the adjust radar keys
- 145 Using the radar markers keys
- 151 11 Alarms, TideTrack, and Video Display
- 152 Understanding alarms
- 166 Understanding TideTrack
- 168 Using the video display option
- 171 12 Setting Up Your
- 172 Changing your display settings
- 175 Changing your navigation settings
- 180 Changing your receiver settings
- 185 Changing your port settings
- 185 Setting up the sounder
- 185 Setting up radar
- 186 Installing Software Updates
- 186 Displaying manufacturer’s information
- 190 Changing the time zone
- 191 Appendix A - Understanding GPS, WAAS, and Radar
- 191 Introducing GPS and WAAS
- 195 Introducing radar
- 199 Appendix B - System Features
- 205 Appendix C - Geodetic Datums
- 213 Appendix D - Glossary
- 219 Index
- 227 Welcome to the
- 227 Using this manual
- 228 Obtaining technical support
- 230 Turning the 958 on and off
- 232 Displaying the chart screen