Updating waypoint coordinates. NORTHSTAR 958

Chapter 6 - Understanding the Waypoints Function

Editing waypoints

You can change any information about an existing waypoint

(except for the type of coordinates used to save it) or erase it entirely by using the 958’s waypoint editing function.

Changing waypoints

To change a waypoint’s name, description, position coordinates, or warning radius:

1. Press the WAYPTS/ROUTES key, then the WAYPOINTS menu key. The 958 displays waypoints in whatever format you last used: WAYPOINTS CHART screen, WAYPOINTS

( LOCAL) screen, WAYPOINTS (ALPHA) screen, or

WAYPOINTS (AVOIDANCE) screen. If necessary, press the

NEXT VIEW menu key to display the format you want.

2. To select a waypoint on the list screens, press the

CURSOR PAD . To select a waypoint on the WAYPOINTS

CHART screen, move the cursor onto the waypoint to highlight it.

958 Operator’s Manual, Rev. A

3. To edit a waypoint on a list screen, press the EDIT menu key. To edit a waypoint on the WAYPOINTS CHART screen, press the EDIT WAYPT menu key.

Page 83