Appendices
How to declare a module in a PLC rack
Procedure This operation enables the user to make a software declaration of a module in a PLC rack.
The example below concerns a Discrete module; the same procedure is used whatever the type of in-rack module.
Step
1
2
Action
Access the application's hardware configuration screen.
Double-click on the slot in which the module is to be configured.
Result: the Add module screen appears.
Add modul
Family:
Analog Modules 1.5
Communication 1.5
Counting 1.5
Discrete 1.5
Simulation 1,0
Tout ou Rien1.5
Module:
TSX DEZ 08A5
TSX DEZ 12D2
TSX DEZ 12D2K
TSX DEZ 08A4
TSX DMZ 16DTK
TSX DPZ 10D2A
TSX DSZ 04T22
TSX DSZ 08T2
TSX DSZ 08T2K
TSX DSZ 08R5
8I 200-240VAC TBLK
12I 24VDC TBLK
12I 24VDC CONN
8I 115VAC TBLK
8I 24VDC+8Q 0,5A CONN
EMERG.STOP 8I 24VDC+2Q
4Q 2A 24VDC TBLK
8Q 0.5A 24VDC TBLK
8Q 0.5A 24VDC CONN
8Q REL TBLK
OK
Cancel
3
4
5
Select the specific application (e.g.: Discrete ) in the Family field.
Select the module reference in the Module field.
Click on Ok to confirm the selection.
Result: the module is declared in its slot; the slot is shown in gray and contains the module reference. u n
C o i t n g
A n a
0
TSX
3722
1
2
3
DEZ
08A5
4
5
6
7
8
9
10
TLX DS 37 PL7 xxE
59
