Modifying the task to which the output is assigned. Schneider Electric Software PLC Application-Specific Functions, Micro/Junior/Pro, 4.5
ಪಿಡಿಎಫ್
ದಾಖಲೆ
ಜಾಹಿರಾತು
ಜಾಹಿರಾತು
Configuration of analog channels
Modifying the task to which the output is assigned
Procedure To modify the task, proceed as follows:
1
2
Access the configuration editor.
Choose the task from the pull-down box list.
Illustration:
Channel
0 MAST
Task
1 MAST
FAST
Symbol Range
4..20mA
4..20mA
250
TLX DS 37 PL7 xxE
/
ಡೌನ್ಲೋಡ್ ಮಾಡಿ
ಕೇವಲ ಸೌಹಾರ್ದ ಜ್ಞಾಪನೆ. ನೀವು ಡಾಕ್ಯುಮೆಂಟ್ ಅನ್ನು ಇಲ್ಲಿಯೇ ವೀಕ್ಷಿಸಬಹುದು. ಆದರೆ ಮುಖ್ಯವಾಗಿ, ನಮ್ಮ AI ಈಗಾಗಲೇ ಅದನ್ನು ಓದಿದೆ. ಇದು ಸಂಕೀರ್ಣ ವಿಷಯಗಳನ್ನು ಸರಳ ಪದಗಳಲ್ಲಿ ವಿವರಿಸಬಹುದು, ನಿಮ್ಮ ಪ್ರಶ್ನೆಗಳಿಗೆ ಯಾವುದೇ ಭಾಷೆಯಲ್ಲಿ ಉತ್ತರಿಸಬಹುದು ಮತ್ತು ದೀರ್ಘವಾದ ಅಥವಾ ಹೆಚ್ಚು ಸಂಕೀರ್ಣವಾದ ಡಾಕ್ಯುಮೆಂಟ್ಗಳನ್ನು ಸಹ ತ್ವರಿತವಾಗಿ ನ್ಯಾವಿಗೇಟ್ ಮಾಡಲು ನಿಮಗೆ ಸಹಾಯ ಮಾಡುತ್ತದೆ.
ಜಾಹಿರಾತು