Discrete application configuration
Discrete inputs parameters
Key:
(1)
(2)
(3)
(4)
76
At a Glance Discrete input modules contain parameters per channel, or per group of consecutive channels.
Parameters The table below shows the parameters available for each discrete input module.
Module reference
TSX DEZ 08A4
TSX DEZ 08A5
TSX DEZ 12D2
TSX DEZ 12D2K
No. of inputs Associated task (1)
Function (2) Filtering
(group of 4 channels)
Type of logic
8 20 ms -
8
12
12
Mast / Fast
/ None
-
Mast / Fast
/ None
-
Mast / Fast
/ None
-
Mast / Fast
/ None
-
20 ms
4 ms or (4)
positive negative
4 ms or (4) -
/
Networ k
50 Hz
60 Hz
50 Hz
60 Hz
-
-
/
/
TSX DEZ 32D2 32 -
TSX DPZ 10D2A
TSX DMZ 16DTK 8 (inputs)
TSX DMZ 28DT
8 (inputs)
16 (inputs)
TSX DMZ 28DTK 16 (inputs)
Mast / Fast
/ None
Normal or (3) 4 ms or (4) -
Mast / Fast
/ None
4 ms or (4) -
Mast / Fast
/ None
4 ms or (4) -
Mast / Fast
/ None
Normal or (3) 4 ms or (4) -
Mast / Fast
/ None
Normal or (3) 4 ms or (4) -
-
-
-
-
TSX DMZ 28DR 16 (inputs)
TSX DMZ 28AR 16 (inputs)
Mast / Fast
/ None
Normal or (3) 4 ms or (4) positive / negative
-
Mast / Fast
/ None
Normal or (3) 20 ms 50 Hz /
60 Hz
Supply fault monitoring
Active /
Inactive
Active /
Inactive
Active /
Inactive
Active /
Inactive
Active /
Inactive
Active /
Inactive
Active /
Inactive
Active /
Inactive
Active /
Inactive
Active /
Inactive
Active /
Inactive
Group of 8 consecutive channels, except for the last group if this has less than eight channels.
Only available on channels 0, 1, 2, 3 and 8 of the module situated in slot 1.
Latching 0 or 1, event processing on rising edge (RE), or on falling edge (FE).
0.1 to 7.5 ms
TLX DS 37 PL7 xxE
Key:
(1)
(2)
(3)
(4)
Discrete application configuration
Module reference
No. of inputs Associated task (1)
Function (2) Filtering
(group of 4 channels)
Type of logic
TSX DMZ 64DTK 32 (inputs) Mast / Fast
/ None
Normal or (3) 4 ms or (4) -
Networ k
Supply fault monitoring
Active /
Inactive
Group of 8 consecutive channels, except for the last group if this has less than eight channels.
Only available on channels 0, 1, 2, 3 and 8 of the module situated in slot 1.
Latching 0 or 1, event processing on rising edge (RE), or on falling edge (FE).
0.1 to 7.5 ms
Note: l l
Parameters in bold correspond to the parameters configured by default.
When a group of channels is not assigned to a task None ), the corresponding channels are not exchanged by the system.
TLX DS 37 PL7 xxE
77
