AEZ 414
Displaying measurements
At a Glance
Electrical ranges:
Standardized display
Electrical ranges: User display
Temperature range
This process is used to select (See
Modification of the Display Format, p. 245) the
display format depending on which formats are provided in the user program: l l
Standardized display
User display
It is necessary to differentiate between the electrical ranges and the thermocouple or thermowell ranges.
The values are displayed in standardized units (in % with 2 decimal places, also with symbol °/
°°°
).
Different standardized formats for each range:
Display Range
Unipolar:
0-10 V
0-5 V (0-20 mA)
1-5 V (4-20 mA)
Bipolar:
+/- 10 V from 0 to 10000 (0 °/
°°°
to 10000 °/
°°°
) from -10000 to +10000 (-10000 °/
°°°
°°°
)
to +10000 °/ l l
The user can select the value range in which the measurements are expressed, by selecting: the minimum limit corresponding to the range minimum 0 °/
°°°
(or -10000 °/ ) the maximum limit corresponding to the range maximum 10000 °/
°°°
+30000
The user can choose between two types of display: l Temperature display . The values are provided by default in tenths of a degree: l l tenth of a degree Celsius, if the unit chosen at configuration is ° C tenth of a degree Fahrenheit, if the unit chosen at configuration is ° F l Standardized display . The user can select standardized display 0-10000 (i.e. 0 to 10000 °/
°°°
), by specifying the minimum and maximum temperatures corresponding to 0 and 10000.
TLX DS 37 PL7 xxE
201
AEZ 414
202
TLX DS 37 PL7 xxE
