AS-i Bus
How to declare an AS-i communication module in the PLC rack
Procedure This operation is used to declare an AS-i communication module in the PLC TSX 37 rack using software.
Step
1
Action
Double click on slot 4 of the base rack.
Result : The dialog box Add module appears:
Add module
Family:
Analog
Communication
Upcounting
Simulation
Alternating
1.5
1.5
1.5
1.0
1.5
Module:
TSX SAZ 10
TSX STZ 10
MODULE AS-Interface
MODULE XL7 - TSX 37l
OK
Cancel
2
3
4
C o m p t a g e
A n a
Select Communication in the Family field.
Select the reference of the module in the Module field.
Confirm the selection with OK .
Result : The module is declared in its slot; the latter is grayed out and contains the module reference.
0
TSX
3722
1
2
3
4
SAZ
10
5
6
Note : Only one TSX SAZ 10 communication module can be installed in a
TSX 37 configuration.
TLX DS 37 PL7 xxE
121
