TSX AMZ 600
Display of Current Values
Introduction
Standardized
Display
User Display
The current value supplied to the application can be directly run by the user who can l l choose (See
Modification of the Display Format, p. 245) between:
using the standardized display 0-10000 (or +/- 10000 for the range +/- 10V), parametrizing the display format by giving the minimum and maximum values required.
The values are displayed in standardized units (in % with 2 decimals, also symbolized °/
°°°
).
Different formats standardized according to the ranges:
Display Range
Unipolar:
0-10 V
0-20 mA
4-20 mA
Bipolar:
+/- 10 V from 0 to 10000 (0 °/
°°° from 0 to 10000 (0 °/
°°° from 0 to 10000 (0 °/
°°°
to 10000 °/
°°°
to 10000 °/
°°°
to 10000 °/
°°°
)
)
) from -10000 to +10000 (-10.000 °/
°°°
°°°
)
to +10.000 °/
The user can select the range of values in which the current values are expressed, by choosing: l the lower limit corresponding to the minimum value of the range 0 °/
°°°
(or -
10000°/
°°°
) l the upper limit corresponding to the maximum value of the range10.000 °/
°°°
These lower and upper limits are integers between - 30000 and + 30000.
224
TLX DS 37 PL7 xxE
