Language words and bits
Exchange management: Module %MWx.MOD.1:Xj or channel %MWx.i.1:Xj report
At a Glance
Description
These word-type objects provide information on the exchange reports for the module or channel i.
They are updated automatically by the system.
The table below explains the meanings of the different bits in the word
%MWx.MOD.1
.
Address
%MWx.i.1:X0
%MWx.i.1:X1
Meaning for Xj = 1
Status parameter exchange error on at least one channel of the module.
Command parameter exchange error on at least one channel of the module.
Description
Example
The table below explains the meanings of the different bits in the word %MWx.i.1
.
Address
%MWx.i.1:X0
%MWx.i.1:X1
Meaning for Xj = 1
Status parameter exchange error on channel i.
Command parameter exchange error on channel i.
The example below shows one possible way in which this type of word can be used
(* Status error detected on module *)
(* located at slot 3 *)
IF NOT %MW3.MOD.0:X0 THEN READ_STS %CH3.MOD;
END_IF;
IF %MW3.MOD.1:X0 THEN SET %M100;
END_IF;
108
TLX DS 37 PL7 xxE
