Discrete application configuration
Description of the configuration screen for a discrete module
At a Glance
Illustration
The configuration screen of the module selected in the rack displays the parameters associated with the Discreteinput or output channels.
This screen gives access to parameter viewing and modification in local mode, and
Debugging in online mode.
1
2
3
TSX DMZ 28DTK [POSITION 01]
Configuration
Designation: 16E 24VCC+12S 0.5A CONN
Channel
6
7
4
5
2
3
0
1
12
13
14
15
8
9
10
11
Symbol Supply fault monitoring
Active
Task
MAST
MAST
Filtering
4 ms
4 ms
4 ms
4 ms
Inputs
Function
TLX DS 37 PL7 xxE
69
Discrete application configuration
Description The table below shows the different elements in the configuration screen and their functions.
Number Element
1 Title bar
2
4
Function
Indicates the reference of the selected module and its physical position in the rack.
Module zone Enables the user to select: l the installation phase: l l
Configuration ,
Debugging (diagnostics), only accessible in online mode.
l the type of channels (inputs or outputs), if the module in question has both inputs and outputs.
Displays the designation of the selected module.
According to the type of module, gives access to the configuration parameters which apply to all the channels of the same type of the module in question, such as: l l the type of inputs (positive or negative Logic), the network frequency, l ...
Displaying this zone is optional. The selection is made using the command View
→
Module zone .
Channel zone Enables the different channels to be parameterizeded. The Symbol column displays the symbol associated with the channel when this has been defined by the user (via the variables editor).
Note: For discrete modules with more than 16 channels of the same type, use the scrollbar to access the different groups of channels.
70
TLX DS 37 PL7 xxE
