Bits and words associated with the AS-i function
Explicit exchange objects: General
At a Glance Explicit exchange objects carry information (e.g.: bus operation, slave status, etc.) and additional commands to carry out advanced programming of the AS-i function.
Note: The configuration constants %KW4.0.r, not documented in this manual, can only be accessed in read mode and correspond to the configuration parameters entered using the Configuration editor.
l l l l l l
Explicit exchange objects are exchanged at the request of the user program using the instructions:
READ_STS (read status words)
WRITE_CMD (write command words),
WRITE_PARAM
READ_PARAM
SAVE_PARAM
(write adjustment parameters),
(read adjustment parameters),
(save adjustment parameters),
RESTORE_PARAM (restore adjustment parameters).
TLX DS 37 PL7 xxE
153
