Modification of the Display Format. Schneider Electric Software PLC Application-Specific Functions, Micro/Junior/Pro, 4.5
Реклама
Реклама
Configuration of analog channels
Modification of the Display Format
Electric Ranges To modify the display format, proceed as follows:
1
2
3
Access the configuration editor.
Double click in the cell of the channel to be modified in the Scale column or press<Enter> with the cursor positioned on the same cell:
The Channel parameters dialog box appears.
Illustration:
Channel
0
1
2
3
4
5
6
7
Used
MAST
Task Symbol Range
+/-10 V
+/-10 V
+/-10 V
+/-10 V
+/-10 V
+/-10 V
+/-10 V
+/-10 V
%..
%..
%..
%..
Scale
User
%..
%..
%..
0
0
0
0
0
0
0
0
Filter
Scale
-100% ->
View
-100
100% -> 100
4 If the default values are selected, the channel parameters display zone shows %..
.
In the opposite case (user display), it shows User .
TLX DS 37 PL7 xxE
245
Configuration of analog channels
Thermal Ranges
(TSX AEZ 414)
To modify the display format, proceed as follows:
1
2
3
Access the configuration editor.
Double click in the cell of the channel to be modified in the Scale column or press
<Enter> with the cursor positioned on the same cell:
The Channel parameters dialog box appears.
Illustration:
Channel
0
1
2
3
Task
MAST
Symbol Range
Pt100
Pt100
+/-10 V
+/-10 V
Scale
%..
1/10 °C
%..
%..
0
0
0
0
Filter
Chan. 0 Parameters
Temperature range from Unit
-2000 to 8500 1/10 °C
° C
° F
Scale
Standardized
View
-2000 1/10 °C -> 0
8500 1/10 °C -> 10 000
4
5
6
7
8
Select the unit in which the readings are to be displayed (Degrees Celsius or
Fahrenheit) using the two command buttons in the Unit zone.
Then select the display mode in the Scale zone: l l
In temperature:
Standardized:
Standardized
Standardized
box not checked
box checked
If the standardized display is selected, if necessary, modify one or both display limits.
In this case, the display becomes user standardized.
Close the Channel parameters dialog box to confirm the selections.
l l
If temperature display is selected, the channel parameters display zone shows
10°C or 1/10°F
1/
If the standardized display (default or user) is selected, the channel parameters display zone shows %..
246
TLX DS 37 PL7 xxE
Завантажити
Реклама