Analog debugging
Module Diagnostics Display
At a Glance When there is a module fault, a certain number of LEDs, which can be accessed in the configuration editor screens, turn red.
l Module position LED at the level of the screen representing it (first configuration editor screen).
l LED integrated in the DIAG command in the "module" level zone.
In addition, pressing the DIAG command button accesses the Module Diagnostics screen which displays the current module faults, classed according to category: internal faults, external faults or other faults.
Illustration for a ASZ 200 (identical for other modules):
Configuration
TSX 3722 V1.5...
XMWI
XTI..
m p c o g e t a
A n a
0 1 3 5 7
TSX
3722
DMZ DMZ
28AR
Chan
0
1
Symbol
AEZ
801
ASZ
200
DIAG ...
4
Global unforcing
F
6 8
ERR
DIAG.
0
Value
DIAG.
0
9
10
Other faults
Faulty channel(s)
OK
Fault display
indicators red
TLX DS 37 PL7 xxE
257
Analog debugging
List of Module
Faults l l l l
List of module faults that can appear during diagnostics:
Module failure
Faulty channel(s)
Configuration fault
Module missing or switched off
Note: In the event of a configuration fault or missing module, access to the module diagnostics screen is not possible. In this case the following message appears on the screen: "The module is missing or different from the one configured to this position".
258
TLX DS 37 PL7 xxE
