Analog debugging
Modification of the Filtering Value
Procedure To modify the filtering value, proceed as follows:
1
2
3
Access the Module debugging screen.
Double click on the line of the channel to be modified to bring up the Channel
Adjust window.
Select a filter value from the list in the Filtering drop-down list dialog box.
Illustration:
4
5
2
3
6
7
Channel
0
1
Symbol F ERR Value Filter
-26
-11
0
0
-16
-47
-37
84
-63
-84
0
0
0
0
0
0
Adjust Channel 2
Filtering
DIAG...
3
0
1
2
-100000 to 10000
Forcing
0
Force
Unforce
4 Confirm by closing.
Note:
Whatever the scanning cycle (normal or fast), modification of filtering is not possible on an unused channel (TSX AEZ 801 / 802, AMZ 600 and interface integrated in bases TSX 37-22).
For the used channels, modification of filtering is also impossible in fast cycle.
TLX DS 37 PL7 xxE
261
