Built-in DOP functions
DISPLAY_MSG function
Role
Implementation Implementation of the DISPLAY_MSG function is developed in the Description of parameters (See Description of the parameters common to the different DOP
functions, p. 276) section.
Specific parameter:
Message number
The Message number parameter defines the alarm message identifier contained in the CCX 17 memory.
Its value is between 1 and 300.
Example
This function is used to display a message contained in the CCX 17 operator dialog console memory.
The illustration below shows an example of DISPLAY_MSG function entry.
DISPLAY_MSG
Parameters
Console address: ADR# 0.0.4
Data to be sent: %KW200
Report: %MW10 4
Value of data to be sent
Message number: 1
OK Cancel
TLX DS 37 PL7 xxE
303
