Configuration
Configuring the axis control modules
Introduction
Accessing the
Configuration
Editor
Before creating an application program, the operational context of the physical and software configuration in which it will be executed must be defined: type of
Premium TSX processor, input/output modules used.
Furthermore, when programming axis control modules, the configuration parameters of the axes used must be defined. To do this the PL7 software provides the configuration editor, which enables these operations to be performed with ease.
The configuration editor also gives access to the axis adjustment parameters and to the debugging functions in online operation.
The Application browser is used to access the configuration editor. To do this:
Step
1
2
3
Action
Open the Station file (either by double clicking on the icon or clicking on its link).
Open the Configuration file (either by double clicking on the icon or clicking on its link),
Double click on the Hardware configuration
Application Browser
Structure View
STATION
Configuration
Hardware configuration
Software configuration
Program
MAST Task
Events
DFB types
Variables
Animation tables
Runtime Screens
Runtime Screens
4 If the Application browser is not displayed: l scroll down the Tools menu and activate the Application browser command, l in the tool bar, click on the Application browser icon:
TLX DS 57 PL7 xxE
73
